The easiest way to increase self-consumption/self-use.
The 3 kW screw-in heating element was specifically designed for use with the photovoltaic power manager.
AC•THOR and the 9 kW screw-in heating element were developed for use with the AC•THOR 9s photovoltaic power manager.
The screw-in heating elements can be installed in fresh water and buffer storage tanks.
Due to their special design, the heating elements are subject to very low thermal surface loads.
which directly contributes to increasing product lifespan.
Continuously adjustable via photovoltaic power manager AC•THOR or AC•THOR 9s
The desired hot water temperature can be set using a rotary knob.
The AC•THOR or AC•THOR 9s detects when it is switched off and automatically goes into standby mode for minimal power consumption.
A compliant safety temperature limiter is of course integrated.
However, some projects require higher temperatures, for example when a buffer storage tank is used.
It should be heated to over 90°C. Screw-in heating elements are also available without a thermostat for this purpose.
Only with a safety temperature limiter. To end the heating process, it is then always necessary to...
to use the temperature sensor that comes with the AC•THOR and the AC•THOR 9s.
Advantages
- With manually adjustable target temperature (bimetallic thermostat)
- 1.5 inch standard thread
- Single-phase or three-phase
- Optionally available without a thermostat, only with a safety temperature limiter.
Scope of delivery
- 1x screw-in heating element 3 kW
Technical data
- Heating power: 0 - 3,000 W when controlled by AC•THOR/AC•THOR 9s
- Mains connection: Single-phase, safety plug, 230 V, 50 Hz
- Protection class: IP45
- Connection cable: 2.8 m
- Dimensions (W x H x D): 88 x 88 x 518 mm
- Manufacturer's warranty: 2 years
Compatible manufacturers with my-PV can be found here.
Manufacturer part number: 20-0500
Article number: MYPV005
PayPal Buyer Protection
Klarna purchase on account
Free shipping within DE & AT from 149€
